Welcome to Xinxiang Haomai Machinery Equipment Co.,Ltd !

Blog

The test for detachable corrugated reel

The test for detachable corrugated reel

http://www.howmech.com/wp-content/uploads/2018/07/corrugated-reel-1.jpg

The course of test as below:

Firstly,installing the empty reel on the trolley,measure the circle run-out of drum and side plate,
Secondly,releasing the wire as per the normal procedure,and measuring the related technical data.detaching and reassembling the reel.
Finally,after completing the steps above,installing the reel on trolley and inspecting again,measuring the related technical data,inspecting the structural strrength of reel.
For this test,the tension of tensioner is 5kN,the working pressure of trolley motor is 110bar,tractive force of dragger is 13kN,the releasing speed shall be 4.4km/h.
The reel is not deformation during the course of test.

http://www.howmech.com/wp-content/uploads/2018/07/corrugated-reel.jpg

Drawing a conclusion:

1.The reel which consist of three pieces inner drum is more easier to detach.
2.The diameter of connection bolt shall be increased and the quantity shall be decreased.
3.In order to assemble,the side plate shall be fixed on the inner drum.
4.Equip inner of side plate and outer of inner drum with rubber for protecting the wire.

Product standard

The design of corrugated bobbin is conformed to the standard GB4005-83,GB4005 and JB/T8137. 3-1999

Technical data

http://www.howmech.com/wp-content/uploads/2018/07/tech-data-corrugated-reel.jpg

Tags:
Prev:
Next:

Name:

E-mail:

Inquiry:

Description:

X

Skype   Mail to us